|
| Papers & Books |
1 Dingguo XIAO, Zhaona ZHANG, Huiling REN, Bo YANG, Qinxue PAN, Chunguang Xu Calibration Principle for Acoustic Emission Sensor Sensitivity Word Conference on Acoustic Emission-2013
2 Hongbo WANG; Chunguang XU; Yao XU Ultrasonic Inspection of Complex Composite Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
3 Xianghui GUO; Chunguang XU; Liu YANG; Kai PENG Thermal reliability evaluation of PLCC packaging using scanning acoustic microscopy Proceedings of 2013Far East Forum on Nondestructive Evaluation/Testing
4 Wentao SONG; Qinxue PAN; Chunguang XU; Xiao LI; Haiyang LIU Benchmark of Residual Stress for Ultrasonic Nondestructive Testing Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
5 Shiyuan ZHOU; Yao XU; Hongbo WANG; Chunguang XU Time Delay Estimation via Third-order Cumulant Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
6 Liu YANG; Qinxue PAN; Chunguang XU; Xianghui GUO; Kai PENG Immersion Ultrasonic Reflection Tomography by Annular Array System Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
7 Xipeng Li; Chunguang Xu; Shiyuan Zhou; Dingguo Xiao Plate Components Ultrasonic Guide Wave Detection Based on the Transducer Array Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
8 Qinxue PAN; Dingguo XIAO; Mingkai DENG; Huiling REN; Yao XU; Chunguang XU A Voltage-Current Method of Measuring Ultrasonic Transducer Impedance Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
9 Shaoze Wang; Xinyu Zhao; Zongxing Lu Ultrasoud detection based on confocal Fabry-Perot interferometer Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
10 Dingguo XIAO; Huiling REN; Jiameng SHAO; Chunguang XU Response Characteristics of ultrasonic transducer under different excitation pulses Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
11 Hongjuan YAN; Kai PENG; Chunguang XU; Qi LIN Properties of Copper Film Characterized by Scanning Acoustic Microscope Proceedings of 2013Far East Forum on Nondestructive Evaluation/Testing
12 Xiandong CAO; Qinxue PAN; Chunguang XU; Shiyuan ZHOU; Haichao CAI; Fanwu MENG Ultrasonic Automatic Scanning for Arbitrary Rotator Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
13 Dingguo XIAO; Jiameng SHAO; Huiling REN; Chunguang Xu Design of a High Voltage Pulse Circuit for Exciting Ultrasonic transducers Proceedings of 2013 Far East Forum on Nondestructive Evaluation/Testing
14 Kai Peng,Chunguang Xu,Xianghui Guo,Dingguo Xiao Detection Resolution of Acoustic Microscopy in Micro-Scale Applied Mechanics and Materials
15 Guo, Xiang Hui; Xu, Chun Guang ; Yang, Liu Thermo-mechanical reliability evaluation of PLCC packaging 4th International Conference on Manufacturing Science and Technology, ICMST 2013
16 Li, Xi Peng; Xu, Chun Guang; Liu, Zhao; Xu, Han Hui The curved plate flaw's location and direction detecting based on the transducer array 2013 International Conference on Mechatronic Systems and Materials Application, ICMSMA 2013
17 Leng, Hui-Wen ; Xu, Chun-Guang; Xiao, Ding-Guo; Wang, Dong-Xing A method for measuring complicated deep-hole profile using line-structured-light sensor Beijing Ligong Daxue Xuebao
18 Zongxing Lu, Chunguang Xu, Xinyu Zhao, Lan Zhang, Hongbo Wang and Qinxue Pan Ultrasonic Transmission Testing of Twin-robots Coordinated Control International Conference on Mechatronics and Automation
19 Haiyang Liu, Chunguang Xu, Wentao Song, Qinxue Pan,Xiao Li, Fanwu Meng Research on making constant valve block of residual compressive stress based on ultrasonic testing 2013 International Symposium on Vehicle,Mechanical and Electrical Engineering
20 Xipeng Li, Chunguang Xu, and Wei Dai THE SEGMENTAL SPHERICAL SHELL THIN PLATE DEFECT’S DETECTION BASED ON TRANSDUCER ARRAY The 12th International Conference of the Slovenian Society for Non-Destructive Testing
21 Guo, X.H.1; Xu, C.G; Yang, L; Liu, Z.Z; Zhao, X.Y; Wang, H.B; Peng, K. Thermo-mechanical reliability evaluation for microelectronic packaging using C-mode scanning acoustic microscopy. Review of Progress in Quantitative Nondestructive Evaluation
22 Chunguang XU, Hongbo WANG ULTRASONIC FIELDS AND INSPECTION OF COMPOSITES Welding Technology Review
23 Chunguang Xu, Hongbo Wang, Xinyu Zhao, Yao Xu, Zongxing Lu and Dingguo Xiao Ultrasonic Penetration Method for Testing Curved Composite Parts 2013 International Congress on Ultrasonics.
24 Shiyuan Zhou, Yao Xu, Dingguo Xiao, Chunguang Xu Time-Delay Estimation via Cross Third-order Cumulant Method Used in Liquid Viscosity Measurement Review of Progress in Quantitative Nondestructive Evaluation
25 Xiao Li, Qinxue Pan, Chunguang Xu,*, Wentao Song The Nondestructive Evaluation of Axial Stress of a Bolt in Site by Combination of Shear and Longitudinal Wave The 12th International Conference of the Slovenian Society for Non-Destructive Testing
26 Juan Hao, Chunguang Xu, Lan Zhang Ultrasonic Detection Technology Based on Joint Robot on Composite Component with Complex Surface Review of Progress in Quantitative Nondestructive Evaluation
27 冷惠文, 徐春广, 肖定国, 王东兴 基于线结构光的复杂深孔内轮廓三维测量方法 北京理工大学学报 2013-02，第33卷第2期，p139-143
28 肖定国，徐春广，王敬瑞，廉小亲，张晓力 基于VC++的超声探伤仪发射端信号测量与处理系统 仪表技术与传感器 2013-04，第4期，p13-15
29 刘钊，徐春广，孟凡武，周世圆，李喜朋 板内缺陷超声导波阵列检测技术 仪表技术与传感器 2013-09，第9期
30 郝 娟， 盛东良，肖定国 激光三角法内孔测头固有几何参数标定方法 制造技术与机床 2013-08，第8期，p124-126
31 徐春广,卢宗兴，郝娟，王洪博，邹志刚 柔性机械手超声无损检测技术 2013年电子机械与微波结构工艺学术会议暨电子机械工程分会
31 尚妍, 徐春广.光学非接触廓形测量技术研究进展.中国兵工学会2008年光学与光电技术交流会论文集.2008-12，34卷增刊，p216-220
32 徐春广, 刘中柱, 赵新玉, 门伯龙, 伍懿.应用于电子封装结构检测的超声显微系统研制.2011年机械电子学学术会议论文集,2011-9，P403-406
33 赵新玉, 徐春广, 孔涛, 肖定国, 伍懿.液浸超声换能器声场特性测量技术.2011年机械电子学学术会议论文集.2011-9，P464-469
34 潘勤学, 栗勇, 徐春广, 肖定国, 杨向臣, 伍懿.超声法焊缝残余应力检测技术研究,2011年机械电子学学术会议论文集.2011-9，P407-412
35 周世圆, 张运涛, 徐春广, 伍懿.无源无线声表面波嵌入式测量理论与技术,2011年机械电子学学术会议论文集,2011-9，P455-463
36 胡勇, 徐春广, 周世圆, 许寒晖.Lamb波在复合材料无损检测中的应用研究,仪器仪表学报（2009中国仪器仪表与测控技术大会论文集）,2009-6，第6期增刊，p787-791
37 徐圆飞, 徐春广, 肖定国, 周世圆.超声换能器电阻抗特性测量方法研究,仪器仪表学报（2009中国仪器仪表与测控技术大会论文集）,2009-6，第6期增刊，p243-250
38 杨天雪, 徐春广, 肖定国, 李爽.阵元宽度对相控线阵超声换能器特性影响的有限元分析.仪器仪表学报（2008中国仪器仪表与测控技术进展大会论文集）,2008-4，第4期增刊，p95-98
39 陈磊, 徐春广, 肖定国, 周世圆.谐振器式SAW应变传感系统构建及应用研究,仪器仪表学报（2008中国仪器仪表与测控技术进展大会论文集）,2008-4，第4期增刊，p107-110
40 李爽, 周世园, 徐春广, 肖定国.超声相控阵信号采集与B型成像处理,仪器仪表学报（2008中国仪器仪表与测控技术进展大会论文集）,2008-4，第4期增刊，p268-271
41 孔涛, 徐春广, 张运涛, 许寒晖.空气耦合超声换能器声场计算与测量研究,机械工程学报,2011-11，第47卷22期，P19-24
42 赵新玉, 刚铁, 徐春广, 卢宗兴.各向异性堆焊结构中超声传播模拟与缺陷回波预测,机械工程学报,2011-04，第47卷8期，P21-27
43 陈泳丹, 梁万武, 席军强, 徐春广.电动客车AMT换挡过程控制策略的研究,汽车工程,2010，第33卷5期，P405-410
44 张运涛, 徐春广, 潘勤学, 刘婧, 李喜朋.Strain transfer mechanism of passive wireless surface acoustic wave torque sensors using shear lag theory ,Journal of Beijing Institute of Technology,2011，第20卷2期，P221-226
45 孔涛, 徐春广, 肖定国.Field measurement method for ultrasonic transducer based on inverse Abel transform,Journal of Beijing Institute of Technology,2011，第20卷2期，P211-215
46 尚妍, 徐春广.光学非接触廓形测量技术研究进展,光学技术,2008-12，34卷增刊，p216-220
47 徐圆飞, 徐春广, 肖定国, 张晓露.基于小球反射法的超声换能器脉冲声场模型研究 ,仪器仪表学报,2010-02，第31卷2期，P253-258
48 冷惠文, 徐春广, 肖定国, 冯忠伟.圆结构光复杂深孔内轮廓测量系统改进,光电工程,2010-01，第37卷1期，P7-12
49 冷惠文, 徐春广, 冯忠伟, 肖定国.基于圆结构光的复杂深孔内轮廓尺寸测量方法,中国图象图形学报,2010-07，第15卷7期，P1084-1090
50 武涵, 徐春广, 肖定国, 郝娟.五自由度磁轴承系统的α阶逆系统解耦控制,北京理工大学学报,2010-09，第30卷9期，P1065-1069
51 吕冬明, 徐春广, 郝娟.磁悬浮系统模糊PID控制器设计,机床与液压,2009-2,37卷第2期，p83-85
52 冯忠伟, 徐春广, 肖定国, 朱文娟.基于圆结构光照明和LED照明相结合的三维检测技术,光学技术,2009-3，35卷第2期，p265-268
53 杨天雪, 徐春广, 肖定国, 李爽.超声相控线阵探头线列参数对波束指向性的影响 ,无损检测,2009，31卷第3期，p181-185
54 陈磊, 徐春广, 周世圆, 肖定国.SAW应变测量中谐振频率提取技术研究,传感器与微系统,2009，28卷第2期，p32-34
55 冯忠伟, 徐春广, 肖定国, 冷惠文.基于环形结构光的药室容积测量技术,仪器仪表学报,2009-6，30卷第6期，p1169-1174
56 徐春广, 武涵, 吕冬明, 郝娟.磁轴承三态脉宽调制开关功放设计研究 ,微计算机信息,2009，25卷第6-2期，P258-259
57 徐春广, 武涵, 吕冬明, 肖定国, 郝娟.基于神经网络的磁轴承自适应控制器,机床与液压,2009-6，37卷第6期，p135-137
58 李爽, 徐春广, 肖定国, 周世圆, 杨天雪.超声相控阵换能器几何参数多目标优化数学模型 ,无损检测,2009，38卷第8期，p589-592
59 胡勇, 徐春广, 周世圆, 许寒辉.HHT在复合材料Lamb波检测中的应用,传感器与微系统,2009，28卷第6期，p110-113
60 徐圆飞, 徐春广, 肖定国, 周世圆, 武婧.小球散射超声脉冲声场的指向性 ,声学技术,2009-10，28卷第5期，p615-619
61 冯忠伟, 徐春广, 冷惠文, 肖定国.圆结构光传感器标定方法,北京理工大学学报,2009-9，29卷第9期，p780-784
62 徐圆飞, 徐春广, 肖定国, 张迪, 田恩杰.基于小球反射法的超声脉冲波声场特性研究 ,压电与声光,2009-12，31卷第6期，p931-934
63 胡勇, 徐春广, 周世圆, 许寒辉.时频分析在复合材料无损检测中的应用研究 ,传感器与微系统,2009，28卷第8期，p14-17
64 李爽, 徐春广, 周世圆, 马龙.脉冲数字式超声相控阵发射系统设计,微计算机信息,2010，26卷第1-2期，p1-2
65 刘启东, 徐春广, 郝娟.基于PMAC的大型超精密车铣机床数控系统开发,机床与液压,2006，第2期，p66-68
66 朱文娟, 徐春广, 周世圆.深孔内轮廓尺寸光学测量系统 ,机械工程学报,2006-5，42卷增刊，p201-204
67 徐春广, 陈磊, 周世圆, 岑雪青, 宋喜锋.火炮身管壁厚差超声测量中的误差源分析 ,航空精密制造技术,2006-8，42卷第4期，p28-29（注：曾发表于《传感器技术》2005，24卷第9期，p35-36）
68 郝娟, 丁懿, 肖定国, 徐春广, 周世圆.基于LMI的多目标模糊状态反馈控制器设计研究 ,电气应用,2006，25卷第8期，p86-90
69 肖定国, 翟邦玺, 徐春广, 陈清华.基于DSP和FPGA的超声相控阵信号收发卡设计,计算机测量与控制,2006，14卷第8期，p1090-1092
70 郝娟, 丁懿, 肖定国, 徐春广, 周世圆.基于线性矩阵不等式的磁悬浮轴承多目标控制系统设计 ,中国电机工程学报,2007-3,第27卷第9期，P110-114
71 丁懿, 郝娟, 肖定国, 徐春广, 周世圆.变速积分PID控制在磁悬浮轴承控制中的应用和改进 ,实验室研究与探索,2006-3，第25卷第3期，P287-288,291
72 徐圆飞, 肖定国, 徐春广, 郝娟.一种基于CAN总线的分布式机床运动控制系统,组合机床与自动化加工技术,2007年第11期，P44-47
73 杨天雪, 徐春广, 李爽.基于FPGA的超声相控阵波束合成技术,无损检测,2008年，第30卷第11期
74 陈磊, 徐春广, 郝娟, 肖定国.基于声表面波谐振器的无源扭矩传感器研究 ,传感器与微系统,2008年第27卷第10期，P73-75
75 吕冬明, 徐春广, 郝娟.主动磁悬浮轴承控制系统的研究,轴承,2008年第11期，P18-22
76 徐圆飞, 肖定国, 徐春广, 郝娟.一种基于CAN总线的单片机机床运动控制系统 ,机床与液压,2008-4，第36卷第4期，P26-28,31
77 朱文娟, 焦开河, 徐春广, 肖定国.Extraction of Laser Stripe Center Line Based on Genetic Algorithm and NURBS Interpolation ,Journal of Beijing Institute of Technology,2008年第17卷第2期，P143-147
78 徐春广, 吕冬明, 郝娟.Design Method for the Magnetic Bearing Control System with Fuzzy-PID Approach ,Journal of Beijing Institute of Technology,2008年第3期，P270-273
79 徐圆飞, 徐春广, 肖定国, 张迪.超声换能器脉冲波声场数值计算与测试,航空学报,2008-11，29卷第6期，P1705-1709
80 吕冬明, 徐春广, 郝娟.主动磁力轴承支承刚度特性研究,轴承,2008-11，第11期，P18-22
81 冯忠伟, 焦开河, 徐春广, 朱文娟, 肖定国.基于模板匹配的火炮身管膛线缠角测量技术研究,兵工学报,2008-11，第29卷第11期，P1362-1366
82 徐圆飞, 徐春广, 肖定国, 周世圆.超声换能器电阻抗特性研究,电子测量技术,2008-11，第31卷第11期，P24-26
83 郑军, 徐春广, 肖定国, 理华, 黄卉.数字图像中照度不均匀校正技术研究,北京理工大学学报,2003-6，第23卷第3期，P285-289
84 郑军, 徐春广, 肖定国, 刘中生.火炮身管内表面综合测量系统研究,北京理工大学学报,2003-12，第23卷第6期，P694-695
85 周世圆, 肖定国, 徐春广, 冯红亮.杨氏模量、切变模量测量的通用传感器,传感器技术,2003年，第22卷第4期，P22-25
86 冯红亮, 肖定国, 徐春广, 周世圆.一种磁致伸缩式超声波激发/接收传感器的研究 ,仪表技术与传感器,2003年第7期，P4-6
87 冯红亮, 肖定国, 徐春广, 周世圆.脉冲超声传感器激发/接收电路设计,仪表技术与传感器,2003年第11期，P30-32
88 郝娟, 肖定国, 徐春广, 张建民.3MVH珩磨机开放式数控系统的设计,制造技术与机床,2003年第6期，P15-16
89 郑军, 徐春广, 肖定国, 张建民.New Image Operator and Its Application in the Inner Surface Detection of Artillery Pipe,Journal of Beijing Institute of Technology(English Edition),2003-9-3，第12卷第3期，P307-311
90 刘启东, 徐春广.基于多体系统理论的车铣中心空间误差模型分析 ,组合机床与自动化加工技术,2005年第5期，p55-58
91 刘启东, 徐春广, 肖定国.机床控制中的双模参数自调整模糊控制器 ,北京理工大学学报,2005年第7期，25卷，p580-584
92 周世圆, 岑雪青, 徐春广, 肖定国.基于磁致伸缩传感器的液体密度测量的研究 ,航空精密制造技术,2005年第1期，40卷，p27-29
93 肖定国, 宣华, 徐春广, 周世圆.基于最小二乘原理的弹翼廓形截面的测量 ,计算机测量与控制,2005年第6期，13卷，p574-576
94 徐春广, 陈磊, 周世圆, 岑雪青, 宋喜锋.火炮身管壁厚差超声测量中的误差源分析 ,传感器技术,2005年第9期，42卷，p28-30
95 岑雪青, 徐春广, 周世圆, 肖定国.超声换能器阵列的多路激发电路设计,机械制造与自动化,2005年第4期，p88-90
96 郑军, 张伟, 施克仁, 徐春广.环形光切测量法的亚像素技术,机械工程学报,2005年第11期，41卷，p228-233
97 刘启东, 徐春广.大型非球曲面光学零件步长伸缩双圆弧插补技术研究 ,航空精密制造技术,2005年第6期，41卷，p8-10
98 刘启东, 徐春广, 郝娟, 宋禧锋.超精密数控机床的规则可调自适应模糊控制系统的研究 ,机床与液压,2005年第12期，p121-123
99 郑军, 徐春广, 刘中生, 理华, 黄卉.深孔测量装置的空间姿态和位置检测技术研究 ,工业仪表与自动化装置,2003年第6期，p57-59
100 周世圆, 徐春广, 肖定国, 西胁信彦, 堀三计.振动熔接焊状态的超声波在线检测方法研究 ,计量技术,2003年第1期，p11-13
101 郑军, 徐春广, 荆佩忠, 肖定国, 刘中生.基于环形激光的深孔内膛形貌检测系统研究 ,光电工程,2004年第1期，31卷，p32-35
102 郑军, 徐春广, 肖定国.基于图像变换的火炮身管膛线参数检测技术研究,兵工学报,2004年第2期，25卷，p134-138
103 周世圆, 肖定国, 徐春广, 冯红亮.基于虚拟仪器技术开发的超声弹性模量测量系统,应用声学,2004年第4期，23卷，p11-15
104 郑军, 徐春广, 肖定国, 黄卉, 理华.炮管内表面磨损图像的检测技术研究,中国图象图形学报,2004年第3期，9卷，p323-327
105 曹辉, 徐春广, 肖定国.基于环形光切测量方法的小管径图像测量系统的设计 ,计算机测量与控制,2004年第8期，12卷，p705-707
106 刘启东, 徐春广, 郝娟, 肖定国.大型超精密机床数控系统的研制,组合机床与自动化加工技术,2004年第8期，p42-43
107 姚志刚, 肖定国, 徐春广, 周世圆.电缆屏蔽技术在EMC设计中的应用实例,船舶,2004年第10期，5卷，p31-34
108 郑军, 张伟, 施克仁, 徐春广.基于环形光切法的复杂深孔图像检测,清华大学学报(自然科学版),2004年第11期，44卷，p1456-1459
109 刘启东, 徐春广, 郝娟.利用宏指令实现数控机床附加模拟轴速度的控制 ,组合机床与自动化加工技术,2004年第12期，p74-76
110 刘启东, 徐春广, 郝娟, 宋禧锋.超精密机床数控伺服系统及其控制机理,机床与液压,2005-02，p27-28
111 刘启东, 徐春广, 蒋正学.非球曲面数控机床图形自动编程系统,中国制造业信息化,2005-01，34卷，p86-88
112 周世圆, 陈磊, 肖定国, 徐春广.超声弹性模量测量中声时测量精度的提高方法,传感器技术,2005-04，24卷，p42-44
113 杨大勇, 王信义, 徐春广.自动化加工中刀具破损监控系统的研究,北京理工大学学报,1999-02，19卷，p163-166
114 杨大勇, 王信义, 徐春广, 贾玉平.声发射监测刀具破损的抗干扰技术研究,北京理工大学学报,1999-06，19卷，p696-700
115 杨大勇, 王信义, 徐春广, 邢济收.加工过程刀具破损的声发射传感监测新技术,仪器仪表学报,1999-04，20卷，p421-423
116 刘中生, 徐春广, 郑军.基于环形光投射成像法的管内壁尺寸表貌测量系统,计量与测试技术,2002-05，p12-13
117 理华, 徐春广, 肖定国, 黄卉, 郑军, 季皖东, 郭浩.小波包原理在滚动轴承声发射检测技术中的应用,机械,2002-04，29卷，p11-12，45
118 杨大勇, 王信义, 徐春广, 邢济收, 张卫民.加工过程刀具破损监测的声发射传感新技术 ,机械工业自动化,1999-03，21卷，p37-39
119 徐永凯, 王信义, 徐春广.两点法测量直线度中传感器对齐误差的探讨 ,宇航计测技术,1999-06，19卷，p21-24
120 徐永凯, 王信义, 徐春广.两点法测量直线度中传感器对齐误差的探付 ,计量技术,2000-01，p6-8
121 王勇, 徐春广, 梁启刚.新型喷气织机控制系统研制,北京理工大学学报,2001-02，21卷，p192-195
122 理华, 徐春广, 肖定国, 黄卉, 郑军, 季皖东, 郭浩.滚动轴承声发射检测技术,轴承,2002-07，p24-26，40
123 徐春广, 王信义, 肖定国.切削状态在线监测的新方法 ,北京理工大学学报,1994-01，14卷，p48-52
124 徐春广, 王信义, 肖定国.材料动态裂纹在线监测的声发射传感新方法 ,北京理工大学学报,1994-02，14卷，p120-124
125 徐春广, 王信义, 张文建.用于实时识别时域信号的神经网络统计模糊算法 ,信号处理,1994-04，10卷，p216-222
126 徐春广, 王信义, 肖定国.金属和非金属裂纹动态监测控制系统,仪器仪表与分析监测,1994-01，p1-7
127 廉小亲, 花存圣, 王信义, 肖定国, 徐春广.汽车板簧疲劳裂纹监测技术,北京理工大学学报,1995-01，15卷，p50-54
128 徐春广, 王信义, 肖定国.数据融合法在监测刀具切削状态中的应用 ,北京理工大学学报,1995-01，15卷，p75-81
129 王信义, 徐春广, 肖定国, 尚建中.自动化加工中刀具破损实时监控方法的研究 ,北京理工大学学报,1995-03，15卷，p294-298
130 邢济收, 王信义, 徐春广.空气传导新型声发射传感器的研究 ,北京理工大学学报,1996-5，第16卷，p517-522
131 徐春广, 王信义, 邢济收.集成流体声发射传感器的设计,仪表技术与传感器,1996-8，p7-10
132 徐春广, 王信义, 邢济收. 张卫民,钻头断裂声发射数学模型,北京理工大学学报,1997-1，第17卷，p55-60
133 李军琪, 王信义, 徐春广.线切割加工的自动编程,机械工艺师,1997-12，p15-16,32
134 徐春广, 王信义, 邢济收, 杨大勇.FMS刀具切削状态多传感器实时在线监测智能系统 ,Journal of Beijing Institute of Technology(English Edition),1997-3，第6卷，p258-266
135 王克勇, 王信义, 张卫民, 徐春广.压缩机故障在线检测系统,仪器仪表与分析监测,1997-3，p15-18,21
136 徐春广, 王信义, 杨大勇.刀具磨破损声发射信号传播特性的理论探讨 ,仪器仪表与分析监测,1997-4，p1-4,18
137 徐春广, 王信义, 邢济收.刀具切削状态的多传感器信息综合法,北京理工大学学报,1997-2，第17卷，p175-180
138 邢济收, 王信义, 张卫民, 徐春广, 王克勇.前馈人工神经网络的变步长直接搜索训练算法 ,北京理工大学学报,1997-2，第17卷，p189-193
139 徐春广, 王信义.液体声发射传感器波动特性理论研究,兵工学报,1998-3，第19卷，p242-246
140 徐春广, 王信义, 邢济收.车刀破损声发射数学模型的理论研究,北京理工大学学报,1998-2，第18卷，p170-175
141 徐春广, 王信义, 邢济收.刀具切削状态模糊性及识别方法 ,北京理工大学学报,1998-4，第18卷，p176-182
142 徐春广, 王信义, 邢济收.车削过程声发射数学模型的理论研究 ,北京理工大学学报,1998-2，第18卷，p183-189
143 徐春广, 王信义, 邢济收. 杨大勇, 尚建忠,自动化刀具切削状态监控仪的研究,北京理工大学学报,1998-3，第18卷，p279-283
144 徐春广, 王信义, 张卫民.钻削过程声发射信号模型的理论研究,北京理工大学学报,1998-3，第18卷，p284-289
145 徐春广, 王信义, 杨大勇.流体声发射传感器实验性能研究 ,传感器技术,1998-3，第17卷，p5-7
146 徐春广, 袁洪芳, 王信义, 邢济收, 杨大勇.用流体声发射传感器监测磨削加工过程,新技术新工艺,1998-3，p16-17
147 徐春广, 王信义.刀具切削状态的电机电流监测新方法,仪表技术与传感器,1998-7，p34-36,42
148 徐春广, 王信义, 杨大勇, 袁洪芳.磨削过程声发射信号传播特性研究 ,北京理工大学学报,1998-4，第18卷，p415-419
149 徐春广, 王信义, 邢济收, 杨大勇.FMS刀具切削状态实时在线监测智能系统 ,机械工程学报,1998-6
150 徐春广, 栗苹.机械设备微小故障在线诊断的新方法,华北电力学院学报,1990-4，p94-102
151 陈青华, 肖定国.超声相控线阵低副瓣分析,河南科技,2006-1，p29-30
152 郝娟, 肖定国, 张建民.大射电望远镜馈源精调平台控制系统的研究与开发,机械科学与技术,2003-7，22卷增刊，p62-63
153 张丽芳, 肖定国, 郝娟, 佟祥国.PMAC卡在感应加热控制系统中的应用实例 ,组合机床与自动化加工技术,2004-5，p47-48
154 张丽芳, 肖定国, 佟祥国.感应加热温度的Fuzzy+PID复合控制方法 ,新技术新工艺,2004-6，p38-40
155 肖定国, 宣华.弹翼廓形的非接触自动测量机研制,组合机床与自动化加工技术,2005-3，p42-43
156 黄卉, 肖定国, 理华, 郑军.磁致伸缩式扭转超声波位移传感器的研究与设计,仪表技术与传感器,2002-6，p4-5，12
157 郝娟, 张建民, 肖定国, 范宇, 贾东云.基于Stewart机构的变轴机床数控系统,机电一体化,2002-1，p38-40
158 李成刚, 丁洪生, 吴平东, 肖定国, 郝娟.大射电望远镜精调平台建模与控制系统方案研究,机械设计与研究,2002-6，18卷，p4-5
159 黄卉, 肖定国, 周世圆, 冯红亮.磁致伸缩式扭转超声波位移传感器计时方法实现 ,电子测量技术,2002-3，p11-12
160 郝娟, 张建民, 肖定国, 范宇.BKX-Ⅰ型变轴数控机床的建模与控制,北京理工大学学报,2002-5，22卷，p576-577
161 宋新民, 王信义, 肖定国.刀具极限磨损破损在线实时监测,机械,1994-4，31卷，p46-48
162 王信义, 肖定国, 宋新民.刀具破磨损的自动监测技术,机械与电子,1992-6，p17-18
163 王信义, 肖定国, 宋新民.刀具破损和磨损自动监测技术,Journal of Beijing Institute of Technology(English Edition),1992-2，p139-150
164 陈磊, 周世圆.基于Matlab仿真的SAW应变测量回波处理电路参数设计,仪器仪表学报（2010中国仪器仪表学术、产业大会论文集2）,2010-8，第8期增刊，p80-83
165 陈磊, 周世圆.基于matlab仿真的SAW应变测量激励电路设计,仪器仪表学报（2010中国仪器仪表与测控技术大会论文集）,2010-8，第8期增刊，p81-85
166 陈磊, 周世圆.基于DDC的SAW回波信号频率提取方法 ,北京化工大学学报(自然科学版),2010-6，37卷，p131-135
167 郝娟, 张建民, 王增平.6-PSS并联加工机加工过程仿真研究,第一届国际机械工程学术会议论文集,2001-11，p35-36
168 张建民, 贾东云, 郝娟, 范宇.6-SPS并联机床加工过程仿真,计算机仿真,2003-2，20卷，p55-58
169 吴滢, 张建民, 范宇, 郝娟.基于6-SPS并联机构自由曲面非接触测量方法的应用研究 ,振动、测试与诊断,2003，4，23卷，p264-267
170 吴滢, 张建民, 范宇, 郝娟.基于6-SPS并联机床加工自由曲面的仿真 ,机床与液压,2003，第6期，p37-38,145
171 张军亮, 张建民, 郝娟, 姜明, 王信义.基于Stewart机构并联加工机的插补算法,北京理工大学学报,1999-6，第3期19卷，p314-317
172 史长虹, 张建民, 张同庄, 丁洪生, 郝娟.虚拟轴数控机床工作精度检验方法探讨,制造技术与机床,2002，第3期，p33-35
173 郝娟, 张建民, 王增平.并联加工机的加工过程仿真,北京理工大学学报,2001-6，第3期21卷，p318-320
174 史长虹, 张建民, 张同庄, 郝娟, 范宇, 邹秋玲, 贾东云.变轴数控机床重复定位精度评定策略探讨,北京理工大学学报,2001-8，第4期21卷，p450-453
175 张建民, 李世健, 郝娟.先进制造系统智能安全检测监控与维护的研究 ,机械设计与制造工程,2001-3，第2期30卷，p44-45
176 张建民, 李世健, 郝娟.柔性制造系统智能安全检测监控与维护(英文) ,Journal of Beijing Institute of Technology(English Edition),2001，第2期10卷，p163-168
177 张建民, 郝娟, 王增平.基于并联机构的加工机的工作空间仿真研究(英文) ,Journal of Beijing Institute of Technology(English Edition),2001，第2期10卷，p191-196
178 郝娟, 张建民, 王增平.6-PSS并联加工机加工过程仿真研究,机械与电子,2001，第1期，p35-36
179 史长虹, 张建民, 张同庄, 郝娟, 范宇, 邹秋玲, 贾东云.变轴数控机床重复定位精度评定策略探讨 ,世界制造技术与装备市场,2001-10，第5期，p62-64
180 沙正骁, 刚铁, 赵新玉.超声换能器声场的模拟和可视化研究,无损检测,2001，第5期33卷，p2-6
181 赵新玉, 刚铁, 张碧星.基于平底孔反射体的双晶直探头测量模型,物理学报,2008-8，第8期57卷，p5047-5055
182 赵新玉, 刚铁, 张碧星.非近轴近似多高斯声束模型的相控阵换能器声场计算,声学学报(中文版),2008-9，第5期33卷，p475-480
183 赵新玉, 刚铁, 袁媛.薄钢板点焊接头超声信号分析,焊接学报,2005-11，第11期26卷，p101-105
184 沙正骁, 刚铁, 赵新玉.超声换能器声场的模拟和可视化研究,无损检测,2011，第5期33卷，p2-6
185 Zhao Xinyu, Gang Tie, Xu Chunguang.Prediction of Side-Drilled Hole Signals Captured by a Dual Crystal Contact Probe,JOURNAL OF NONDESTRUCTIVE EVALUATION , 105-110,Jun-10
186 Xu, HH (Xu, Hanhui)1, Xu, CG (Xu, Chunguang)1, Zhou, SY (Zhou, Shiyuan)1, Hu, Y (Hu, Yong)1.Time-frequency Analysis for Nonlinear Lamb Wave Signal,PROCEEDINGS OF THE 2009 2ND INTERNATIONAL CONGRESS ON IMAGE AND SIGNAL PROCESSING, VOLS 1-9 , 4267-4272 ,, Tianjin, PEOPLES R CHINA, OCT 17-19, 2009
187 Wu, H (Wu, Han)1, Xu, CG (Xu, Chunguang)1, Xiao, DG (Xiao, Dingguo)1, Hao, JA (Hao, Juan)1.Magnetic Field Analysis and Optimal Design of Magnetic Bearing,2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS , 1666-1670 , Changchum, PEOPLES R CHINA , AUG 09-12, 2009
188 Leng, HW (Leng, Huiwen)1, Xu, CG (Xu, Chunguang)1, Xiao, DG (Xiao, Dingguo)1, Wang, DX (Wang, Dongxing).Compression Storage of Images With an Effective Annular Zone,2009 THIRD INTERNATIONAL SYMPOSIUM ON INTELLIGENT INFORMATION TECHNOLOGY APPLICATION, VOL 1, PROCEEDINGS , 458-461 DOI, 10.1109/IITA.2009.266, Nanchang, PEOPLES R CHINA , NOV 21-22, 2009
189 Xu, CG (Xu, Chunguang)1, Rose, JL (Rose, Joseph L.), Yan, F (Yan, Fei), Zhao, X (Zhao, Xiang).DEFECT SIZING OF PLATE-LIKE STRUCTURE USING LAMB WAVES,REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 28A AND 28B , AIP Conference Proceedings , 1096 1575-1582 , Univ Chicago, Chicago, IL , JUL 20-25, 2008
190 Leng, HW (Leng, Huiwen)1, Xu, CG (Xu, Chunguang)1, Feng, ZW (Feng, Zhongwei)1, Xiao, DG (Xiao, Dingguo)1.Applying PSD Analysis in Ring-Structured-Light 3D Measurement, FIRST IITA INTERNATIONAL JOINT CONFERENCE ON ARTIFICIAL INTELLIGENCE, PROCEEDINGS , 376-380 DOI, 10.1109/JCAI.2009.131 , 2009, ,Hainan Isl, PEOPLES R CHINA , APR 25-MAY 26, 2009
191 Leng, HW (Leng, Huiwen)1, Xu, CG (Xu, Chunguang)1, Feng, ZW (Feng, Zhongwei)1, Xiao, DG (Xiao, Dingguo)1.A Method for Extracting the Center of Ring-Structured-Light Stripe ,2008 INTERNATIONAL SYMPOSIUM ON INTELLIGENT INFORMATION TECHNOLOGY APPLICATION, VOL II, PROCEEDINGS 页, 906-910 DOI, 10.1109/IITA.2008.161 , 2008 ,Shanghai, PEOPLES R CHINA, DEC 21-22,
192 Zhu Wenjuan, Xu Chunguang, Xiao Dingguo.Optical measuring system for defects of artillery lumen - art. no. 66240G, INTERNATIONAL SYMPOSIUM ON PHOTOELECTRONIC DETECTION AND IMAGING 2007, OPTOELECTRONIC SYSTEM DESIGN, MANUFACTURING, AND TESTING , PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE) , 6624 , G6240-G6240 , 2008,, Beijing, PEOPLES R CHINA , SEP 09-12, 2007
193 Feng, ZW (Feng, Zhongwei)1, Xu, CG (Xu, Chunguang)1, Xiao, DG (Xiao, Dingguo)1, Zhu, WJ (Zhu, Wenjuan)1.In-pipe Profile Detection Using Circular Structured Light and Its Calibration Technique , 2008 INTERNATIONAL CONFERENCE ON INFORMATION AND AUTOMATION, VOLS 1-4 , 1437-1441 , 2008 ,,Changsha, PEOPLES R CHINA , JUN 20-23, 2008
194 Xu, Hanhui (Institute of High Energy Physics, Chinese Academy of Sciences, Beijing, China), Xu, Chunguang, Wang, Lijiu.Lamb wave ultrasonic tomography for edge detecting of material loss in isotropic media,Applied Mechanics and Materials, v 121-126, p 201-205, 2012, Frontiers of Manufacturing and Design Science II, v 121-126, p 201-205, 2012,
195 Chen, Yongdan (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China), Liang, Wanwu, Xi, Junqiang, Xu, Chunguang.A study on the control strategy for the gear shifting of AMT in a electric bus,Qiche Gongcheng/Automotive Engineering, v 33, n 5, p 405-410, May 2011 Language, Chinese,v 33, n 5, p 405-410, May 2011
196 Meng, Fanwu (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Hao, Juan, Xiao, Dingguo .A quick algorithm for circularity error evaluation based on minimum circumscribed circle method,2011 International Conference on Electric Information and Control Engineering, Apr,ICEICE 2011 - Proceedings,p 2916-2919, 2011
197 Xu, Hanhui (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Li, Xipeng, Wang, Lijiu.Study on single mode Lamb wave interaction with defect of plate by finite element model,2011 International Conference on Advanced in Control Engineering and Information Science, CEIS 2011,Procedia Engineering, v 15, p 5067-5072, 2011
198 Meng Fanwu (Sch. of Mech. Eng., Beijing Inst. of Technol., Beijing, China), Xu Chunguang, Hao Juan, Xiao Dingguo.A quick algorithm for circularity error evaluation based on minimum circumscribed circle method,2011 International Conference on Electric Information and Control Engineering, p 4 pp., 2011
199 Liu, Zhongzhu (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing, China), Xu, Chunguang.Men, Bolong,Application of SAGE algorithm to estimate thin layer material's thickness in ultrasonic NDE,Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, v 6, p 2869-2872, 2011
200 Pan, Qinxue (School of Mechanical Engineering, Beijing Institute of Technology, 100081, China), Li, Yong, Bai, Xiaoguang, Xu, Chunguang, Yang, Xiangchen.Inspecting integrity and residual stress of plate by ultrasonic wave,2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011,p 1137-1141, 2011
201 Gao, Chunyan (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China), Xiao, Dingguo, Pan, Qinxue, Xu, Chunguang.Ultrasonic transducers frequency response study with equivalent circuit and finite element method,2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011, p 1746-1750, 2011
202 Meng Fanwu (Sch. of Mech. Eng., Beijing Inst. of Technol., Beijing, China), Xu Chunguang, Li Haiming, Hao Juan, Xiao Dingguo.Quick algorithm of maximum inscribed circle method for roundness evaluation,2011 International Conference on System Science, Engineering Design and Manufacturing Informatization, p 348-51, 2011
203 Meng, Fanwu (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Li, Haiming, Hao, Juan, Xiao, Dingguo.A quick algorithm of maximum inscribed circle method for roundness evaluation,2011 International Conference on System Science, Engineering Design and Manufacturing Informatization, ICSEM 2011, v 2, p 348-351, 2011,
204 Liu, Zhongzhu (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China), Bai, Xiaoguang, Pan, Qinxue, Li, Yong, Xu, Chunguang.Ultrasonic echoes estimation method using genetic algorithm,2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011, p 613-617, 2011, 2011
205 Xu, Hanhui (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Zhou, Shiyuan.Study of lamb wave propagation in plate for UNDE by 2-D FEM model,2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010, v 3, p 556-559, 2010
206 Zhang, Yuntao (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Zhao, Bing, Liu, Zhongzhu.Frequency evaluation of SAW torque response signal using hilbert envelope-demodulation, Proceedings - 2010 3rd International Congress on Image and Signal Processing, CISP 2010,v 9, p 4069-4073, 2010
207 Wu, Han (School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China), Xu, Chunguang, Xiao, Dingguo, Hao, Juan.Magnetic field analysis and optimal design of magnetic bearing,2009 IEEE International Conference on Mechatronics and Automation, ICMA 2009,p 1666-1670, 2009
208 Hu, Yong (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Xu, Hanhui.The application of wavelet transform for lamb wave tomography,2009 1st International Conference on Information Science and Engineering, ICISE 2009,p 681-683, 2009
209 Zhang, Yuntao (Key laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Zhou, Shiyuan, Zhao.Bing,Evaluating parameters of passive SAW torque sensing signal using Genetic algorithms,ICCASM 2010 - 2010 International Conference on Computer Application and System Modeling,Proceedings,v 9, p V9174-V9178, 2010
210 Leng, Huiwen (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China), Xu, Chunguang, Feng, Zhongwei, Xiao, Dingguo.Applying PSD analysis in ring-structured-light 3D measurement,IJCAI International Joint Conference on Artificial Intelligence,p 376-380, 2009, Proceedings - 1st
211 Xu, Hanhui (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Zhou, Shiyuan.A new ultrasonic guided wave signal processing method for unde of laminated composite material,2010 International Conference on Mechanic Automation and Control Engineering, MACE2010,p 2542-2545, 2010
212 Kong, Tao (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Zhou, Shiyuan.A time-frequency method for ultrasonic flaw inspection based on HHT,Proceedings - 2010 3rd International Congress on Image and Signal Processing, CISP 2010, v 8, p 3988-3991, 2010
213 Leng, Huiwen (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Xiao, Dingguo, Wang, Dongxing.Compression storage of images with an effective annular zone,3rd International Symposium on Intelligent Information Technology Application, IITA 2009,v 1, p 458-461, 2009
214 Hu Yong (Sch. of Mech. Eng., Beijing Inst. of Technol., Beijing, China), Xu Chunguang, Xu Hanhui.The Application of Wavelet Transform for Lamb Wave Tomography,2009 1st International Conference on Information Science and Engineering (ICISE 2009),p 681-3, 2009
215 Kong, Tao (School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Xiao, Dingguo.Experimental ESD method for restoration of blurry image in ultrasonic C-scan,2010 International Conference on Mechanic Automation and Control Engineering, MACE2010, p 2632-2635, 2010
216 Zhu, Wenjuan (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing, 100081, China), Xu, Chunguang, Xiao, Dingguo.Optical measuring system for defects of artillery lumen,Proceedings of SPIE - The International Society for Optical Engineering/International Symposium on Photoelectronic Detection and Imaging 2007, Optoelectronic System Design, Manufacturing, and Testing,v 6624, 2008
217 Shang Yan (Sch. of Mech. & Vehicular Eng., Beijing Inst. of Technol., Beijing, China), Xu Chunguang, Xiao Dingguo, Meng Fanwu.A method of optical non-contact measurement to rotary part's profile,Proceedings of the SPIE - The International Society for Optical Engineering,v 7130, p 713055 (7 pp.), 2008
218 Shang, Yan (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing 100081, China), Xu, Chunguang, Xiao, Dingguo, Meng, Fanwu.A method of optical non-contact measurement to rotary part's profile,Proceedings of SPIE - The International Society for Optical Engineering/Fourth International Symposium on Precision Mechanical Measurements,v 7130, 2008
219 Feng, Zhongwei (School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing, China), Xu, Chunguang, Xiao, Dingguo, Zhu, Wenjuan.In-pipe profile detection using circular structured light and its calibration technique,Proceedings of the 2008 IEEE International Conference on Information and Automation, ICIA 2008,p 1437-1441, 2008
220 Xu, Chunguang, Xie, Weixin.Instantaneous frequency estimation method based on cross localized Wigner-Ville distributions,Dianzi Kexue Xuekan/Journal of Electronics,v 22, n 5, p 753-758, Sep 2000
221 Xu, Chunguang (Beijing Inst of Technology, Beijing, China), Wang, Xinyi, Xing, Jishou, Yang, Dayong.Multi-sensor intelligent system for on-line and real-time monitoring tool cutting state in FMS,Journal of Beijing Institute of Technology (English Edition),v 6, n 3, p 258-266, 1997
222 Sun, Xiaorong (Xidian Univ, Xi'an, China), Xu, Chunguang, Wang, Yongsheng.Unmanned space vehicle navigation by GPS,IEEE Aerospace and Electronic Systems Magazine,v 11, n 7, p 31-34, Jul 1996
223 Xu, Chunguang (College of Mathematical Science, Peking University, Beijing 100871, China).A difference scheme with anti-diffusion terms to improve the computation of contact discontinuities and the study of weak discontinuities in compressible flow,Communications in Nonlinear Science and Numerical Simulation,v 1, n 4, p 40-49, 1996
224 Lan, Hua (School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China), Yan, Liang, Xiao, Dingguo, Jiao, Zongxia, Chen, I-Ming.Surface-to-surface calibration of acoustic emission sensors,Sensors and Actuators, A, Physical,2012,Article in Press
225 Zhao, Xinyu (Key Laboratory of Fundamental Science for Advanced Machining, School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China), Gang, Tie, Xiao, Dingguo, Wang, Junren.Locating flaws in anisotropic and inhomogeneous weldments using ray tracing method,China Welding (English Edition),v 20, n 1, p 17-21, March 2011
226 Hao, Juan (Sch. of Mech. Eng. and Automation, Beijing Institute of Technology, 100081 Beijing, China), Zhang, Jianmin, Xiao, Dingguo, Fan, Yu, Jia, Dongyun.Inverse kinematics and realtime control of A6-DOF parallel robot,Proceedings 2001 International Workshop on Bio-Robotics and Teleoperation,p 375-378, 2001
227 Nishiwaki, Nobuhiko (Tokyo Univ. of Agric. and Technology, 2-24-16, Nakacho, Koganei-shi, Tokyo 184-8588, Japan), Hori, Sankei, Otsuki, Naotaka, Zhou, Shiyuan.Measurement of behavior at welding resin parts using ultrasonic technique,Proceedings of the IEEE Ultrasonics Symposium,v 1, p 823-826, 2002
228 Zhao, Xinyu (Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, Beijing 100081, China), Lu, Zongxing, Pan, Qinxue, Shan, Zhipeng, Bai, Xiaoguang, Liu, Long.Prediction of side-drilled hole signals in anisotropic cladding component,2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011,p 1142-1146, 2011
229 Zhao, Xinyu (State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001, China), Gang, Tie.Nonparaxial multi-Gaussian beam models and measurement models for phased array transducers,Ultrasonics,v 49, n 1, p 126-130, January 2009
230 Zhao, Xinyu (State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China), Gang, Tie, Zhao, Xuemei.Simulation and experiments of ultrasonic propagation in nickel-based alloy weldments, China Welding (English Edition),v 17, n 4, p 17-21, December 2008
231 Zhao, Xinyu (State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China), Gang, Tie, Zhang, Bixing.Prediction of radiation beam fields from an array transducer with nonparaxial multi-Gaussian beam model,Shengxue Xuebao/Acta Acustica,v 33, n 5, p 475-480, September 2008
232 Zhao Xinyu (State Key Lab. of Adv. Welding Production Technol., Harbin Inst. of Technol., Harbin, China), Gang Tie, Zhang Bixing.Prediction of radiation beam fields from an array transducer with nonparaxial multi-Gaussian beam model,Acta Acustica,v 33, n 5, p 475-80, Sept. 2008
233 Pan Qinxue, Guo Shuxiang, Okada Takuya.Development of a Wireless Hybrid Microrobot for Biomedical Applications,IEEE/RSJ International Conference on Intelligent Robots and Systems,OCT 18-22, , 5768-5773, 2010
234 Pan Qinxue, Guo Shuxiang, Li Desheng.Development of a Paddling Type of Microrobot for Biomedical Application,IEEE International Conference on Robotics and Biomimetics (ROBIO),, 888-893,DEC 19-23, 2009
235 Pan Qinxue, Guo Shuxiang.A Paddling Type of Microrobot in Pipe , IEEE International Conference on Robotics and Automation, 页, 637-642，MAY 12-17, 2009
236 Guo Shuxiang, Zhao Zixin, Pan Qinxue.A CDMA Acoustic Communication System for Multiple Underwater Robots ,IEEE International Conference on Robotics and Biomimetics (ROBIO),FEB 22-25，VOLS 1-4 , 1522-1526,2009
237 Pan Qinxue, Guo Shuxiang, Li Desheng.Mechanism and Control of a Spiral Type of Microrobot in Pipe,IEEE International Conference on Robotics and Biomimetics (ROBIO),, 43-48，FEB 22-25, 2009
238 Guo Shuxiang, Pan Qinxue, Khamesee Mir Behrad.Development of a novel type of microrobot for biomedical application,MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS,307-314 DOI, 10.1007/s00542-007-0430-1 , MAR 2008
239 Pan Qinxue, Guo Shuxiang.Development of a Spiral Type of Wireless Microrobot ,IEEE/ASME International Conference on Advanced Intelligent Mechatronics,813-818 ，Xian, PEOPLES R CHINA, JUL 02-05, 2008
240 Guo Shuxiang, Pan Qinxue.Mechanism and control of a novel type microrobot for biomedical application,IEEE International Conference on Robotics and Automation,Rome, ITALY , APR 10-14,187-192
241 Pan Qinxue, Gu Shuxiang.Development of the novel types of biomimetic microrobots driven by external magnetic field,IEEE International Conference on Robotics and Biomimetics (ROBIO 2007),Sanya, PEOPLES R CHINA , DEC 15-18, 2007， 256-261
242 Pan Qinxue, Guo Shuxiang.A locomotive microrobot for biomedical application,Annual Conference on the Society-of-Instrument-and-Control-Engineers,Kagawa Univ, Takamatsu, JAPAN , SEP 17-20, 2007，VOLS 1-8 , 242-247
243 Guo Shuxiang, Pan Qinxue.Development of multifunctional wireless microrobot for biomimedical application, IEEE/ICME International Conference on Complex Medical Engineering,Beijing, PEOPLES R CHINA, MAY 23-27, 2007，VOLS 1-4 , 1836-1841
244 Pan Qinxue, Guo Shuxiang.Characteristic evaluation of a novel type of microrobot,IEEE International Conference on Mechatronics and Automation,Harbin, PEOPLES R CHINA, AUG 05-08, 2007， 135-140
245 Guo Shuxiang, Pan Qinxue.Design and control of a novel type of microrobot moving in pipe,IEEE International Conference on Mechatronics and Automation,Henan Univ Sci & Technol, Luoyang, PEOPLES R CHINA , JUN 25-28, 2006， 649-653
246 Guo Shuxiang, Pan Qinxue, Zhang Wei.Characteristics of the microrobot moving in the vertical pipe,6th World Congress on Intelligent Control and Automation,Dalian, PEOPLES R CHINA, JUN 21-23, 2006，Vols 1-12, Conference Proceedings , 9282-9286
247 Guo Shuxiang, Wang Han, Pan Qinxue.Solenoid actuator-based novel type of micropump,IEEE International Conference on Robotics and Biomimetics (ROBIO 2006) ,Kunming, PEOPLES R CHINA , DEC 17-20, 2006，Vols 1-3 , 1281-1286
248 Pan, Qinxue (Dept. of Intelligent Mechanical Systems Eng'g., Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang, Li, Desheng.Development of a paddling type of microrobot for biomedical application,2009 IEEE International Conference on Robotics and Biomimetics, ROBIO 2009, p 888-893, 2009
249 Pan, Qinxue (Department of Intelligent Mechanical Systems Engineering, Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang, Okada, Takuya.Development of a wireless hybrid microrobot for biomedical applications,IEEE/RSJ 2010 International Conference on Intelligent Robots and Systems, IROS 2010 - Conference Proceedings,p 5768-5773, 2010
250 Pan, Qinxue (Dept. of Intelligent Mechanical Systems Eng'g, Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang.A paddling type of microrobot in pipe,Proceedings - IEEE International Conference on Robotics and Automation, p 2995-3000, 2009
251 Pan, Qinxue (Dept. of Intelligent Mechanical Systems Eng'g., Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang, Okada, Takuya.Mechanism and control of a spiral type microrobot,2010 IEEE International Conference on Information and Automation, ICIA 2010,p 735-740, 2010
252 Guo, Shuxiang (Faculty of Engineering, Kagawa University, Takamatsu, Japan), Pan, Qinxue, Zhang, Wei.Characteristics of the microrobot moving in the vertical pipe,Proceedings of the World Congress on Intelligent Control and Automation (WCICA), v 2, p 9282-9286, 2006
253 Guo, Shuxiang (Faculty of Engineering, Kagawa University, 2217-20, Hayashi-cho, Takamatsu, 761-0396, Japan), Pan, Qinxue.Mechanism and control of a novel type microrobot for biomedical application,Proceedings - IEEE International Conference on Robotics and Automation,p 187-192, 2007
254 Pan, Qinxue (Dept. of Intelligent Mechanical Systems Engineering, Kagawa University, Japan), Guo, Shuxiang.A locomotive microrobot for biomedical application,Proceedings of the SICE Annual Conference,p 242-247, 2007
255 Guo, Shuxiang (Department of Intelligent Mechanical Systems Engineering, Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Zhao, Zixin, Pan, Qinxue.A CDMA acoustic communication system for multiple underwater robots,2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008,p 1522-1526, 2008
256 Pan, Qinxue (Graduate School of Engineering, Kagawa University, 2217-20, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang.Development of the novel types of biomimetic microrobots driven by external magnetic field,2007 IEEE International Conference on Robotics and Biomimetics, ROBIO,p 256-261, 2008
257 Guo, Shuxiang (Faculty of Engineering, Kagawa University, 2217-20, Hayashi-cho, Takamatsu, 761-0396 Kagawa, Japan), Pan, Qinxue.Development of multifunctional wireless microrobot for biomimedical application,2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007, p 1836-1841, 2007
258 Pan, Qinxue (Dept. of Intelligent Mechanical Systems Eng'g., Kagawa University, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang.Characteristic evaluation of a novel type of microrobot,Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, ICMA 2007,p 135-140, 2007
259 Guo, Shuxiang (Faculty of Engineering, Kagawa University, 2217-20, Hayashi-Cho, Takamatsu, Japan), Pan, Qinxue.Design and control of a novel type of microrobot moving in pipe,2006 IEEE International Conference on Mechatronics and Automation, ICMA 2006,v 2006, p 649-653, 2006
260 Guo, Shuxiang (Faculty of Engineering, Kagawa University, 2217-20, Hayashi-cho, Takamatsu, 761-0396, Japan), Wang, Jian, Pan, Qinxue, Guo, Jian.Solenoid actuator-based novel type of micropump,2006 IEEE International Conference on Robotics and Biomimetics, ROBIO 2006,p 1281-1286, 2006
261 Pan, Qinxue (Graduate School of Engineering, Kagawa University, 2217-20, Hayashi-cho, Takamatsu, 761-0396, Japan), Guo, Shuxiang.Mechanism and control of the novel types of wireless microrobots,Proceedings of 2nd Joint Student Workshop on Mechatronics, JSWM,p 19-22, 2008
262 Guo, Shuxiang (Kagawa University, 2217-20, Hayashi-cho, Takamatsu, Kagawa 761-0396, Japan), Pan, Qinxue, Khamesee, Mir Behrad.Development of a novel type of microrobot for biomedical application,Microsystem Technologies,v 14, n 3, p 307-314, March 2008
263 Pan, Qinxue, Guo, Shuxiang, Li, Desheng.Mechanism and control of a spiral type of microrobot in pipe,2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008,p 43-48, 2008
264 Pan, Qinxue, Guo, Shuxiang.Development of a spiral type of wireless microrobot,IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM,p 813-818, 2008 |
|
